OS-LS-6224 -   Alcatel OmniStack LS Chassis (24 x 100 Base-X SFP, 2 x 10 100 1000, 2 x combo)

Product PDF:

Specificaties Alcatel OS-LS-6224 Professionele 19 inch switch met 24 x 10 100 mbit poort 2 x gigabit en 2 x combo poorten:

• • Dual image and dual configuration file storage provides backup
  
• • Industry standard CLI for familiar interface and reduced training costs
  
• • Easy-to-use point-and-click web based element manager with built-in help for easy configuration of new technology features
  
• • Remote telnet management or secure shell
  
• • Port based, port mirroring for troubleshooting
  
• • Human readable ASCII-based config files for offline editing and bulk configuration
  
• • IGMPv1/v2/v3* snooping to optimize multicast traffic
  
• • BootP/DHCP client allows auto-config of switch IP information to simplify deployment
  
• • Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting
  
• • Auto MDI/MDIX automatically configures transmit and receive signals to support straight thru and crossover cabling
  
• • SNMPv1/v2/v3
  
• • Supports RFC 2819 RMON group (1-Statistics, 2-History, 3-Alarm & 9-Events)
  
• • Simple Network Time Protocol (SNTP) for network wide time synchronization
  
• • Alcatel Mapping Adjacency Protocol (AMAP) for building topology maps within OmniVista
  
• • Virtual cable tester provides switch-based integrity testing on copper Ethernet cabling
  
• • Event logging and remote SYSLOG support
  

• • 255 VLANs
  
• • 4,094 tag value support
  
• • Per port, 802.1Q, MAC, IP subnet and protocol VLAN
  
• • Per service VLAN stacking (Q in Q)*
  

• • 802.1w rapid recovery spanning tree allows sub-second failover to redundant link
  
• • 802.1d spanning tree for loop free topology and link redundancy
  
• • 802.1s multiple spanning tree
  
• • Fast forwarding mode on user ports to bypass 30-second delay for spanning tree
  
• • Static and 802.3ad dynamic link aggregation that supports automatic configuration of link aggregates with other switches.
  
• • Broadcast storm control
  
• • Redundant 1on1 power
  
• • Fault tolerant loop stack topology
  

• • 802.1p, TOS, DSCP marking
  
• • QoS mapping: 802.1p to TOS/DSCP, TOS to 802.1p/DSCP, DSCP to 802.1p/TOS
  
• • Classification per port, 802.1p(COS) value, MAC SA/DA, Ethertype, TOS precedence, DSCP value, ICMP code and type, IP SA/DA, IP protocol, TCP/UDP port
  
• • Four egress queues per port that support strict and WRR queuing algorithms
  
• • Ingress bandwidth rate limiting per port/flow
  
• • Egress bandwidth rate limiting per port/queue
  
• • Human readable ASCII-based config files for offline editing and bulk configuration
  
• • IGMPv1/v2/v3* snooping to optimize multicast traffic
  
• • BootP/DHCP client allows auto-config of switch IP information to simplify deployment
  
• • Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting
  
• • Auto MDI/MDIX automatically configures transmit and receive signals to support straight thru and crossover cabling
  
• • SNMPv1/v2/v3
  
• • Supports RFC 2819 RMON group (1-Statistics, 2-History, 3-Alarm & 9-Events)
  
• • Simple Network Time Protocol (SNTP) for network wide time synchronization
  
• • Alcatel Mapping Adjacency Protocol (AMAP) for building topology maps within OmniVista
  
• • Virtual cable tester provides switch-based integrity testing on copper Ethernet cabling
  
• • Event logging and remote SYSLOG support
  

• • 255 VLANs
  
• • 4,094 tag value support
  
• • Per port, 802.1Q, MAC, IP subnet and protocol VLAN
  
• • Per service VLAN stacking (Q in Q)*
  

• • 802.1w rapid recovery spanning tree allows sub-second failover to redundant link
  
• • 802.1d spanning tree for loop free topology and link redundancy
  
• • 802.1s multiple spanning tree
  
• • Fast forwarding mode on user ports to bypass 30-second delay for spanning tree
  
• • Static and 802.3ad dynamic link aggregation that supports automatic configuration of link aggregates with other switches.
  
• • Broadcast storm control
  
• • Redundant 1on1 power
  
• • Fault tolerant loop stack topology
  

• • 802.1p, TOS, DSCP marking
  
• • QoS mapping: 802.1p to TOS/DSCP, TOS to 802.1p/DSCP, DSCP to 802.1p/TOS
  
• • Classification per port, 802.1p(COS) value, MAC SA/DA, Ethertype, TOS precedence, DSCP value, ICMP code and type, IP SA/DA, IP protocol, TCP/UDP port
  
• • Four egress queues per port that support strict and WRR queuing algorithms
  
• • Ingress bandwidth rate limiting per port/flow
  
• • Egress bandwidth rate limiting per port/queue
  

• • 802.1x port based user authentication with multiple host mode
  
• • 802.1x Multi-client, multi-VLAN support for per-client authentication and VLAN assignment*
  
• • Guest VLAN provides limited network access for unauthorized clients
  
• • MAC address lockdown allows only known devices to have network access preventing unauthorized network device access includes lockdown after a user-configured number of MAC addresses have been learned
  
• • RADIUS and TACACS+ admin authentication prevents unauthorized switch management
  
• • Secure Shell (SSL), Secure Socket Layer (SSL) and SNMPv3 for encrypted remote management communication
  
• • Access control lists to filter out unwanted traffic including denial of service attacks
  
• • Access control lists (ACLs) are per port, MAC SA/DA, IP SA/DA, ICMP type and code, Ethertype, TCP/ UDP port
  
• • STP root guard prevents an unauthorized device from becoming the root of a spanning tree.
  

• • OS-LS-6200: 24 or 48 10/100BaseT RJ-45 ports on the front panel. Each copper port is capable of auto-MDI/MDI-X sensing.
  Stacking Ports
  
• • OS-LS-6200: Two 10/100/1000 copper RJ-45 ports. OS-LS-6200 supports a fault tolerant looped stacking configuration. In a standalone configuration, these ports can be used as normal network ports.
  Combo Ports
  
• • OS-LS-6200: Two Gigabit Ethernet SFP (mini-GBIC) plus two 10/100/1000 RJ-45 combo ports are located on the front panel. Users determine whether the mini-GBIC or 10/100/1000 ports will operate. The mini-GBIC ports support full duplex mode only.
  
• • SFP (mini-GBIC) ports support 100Base FX fiber optic transceivers for 100mb fiber connectivity
  

• • OS-LS-6224: 17.32 x 9.05 x 1.73 in., 44 x 23 x 4.4 cm (W x D x H)
  
• • OS-LS-6224P/48/48P : 17.32 x 12.99 x 1.73 in., 44 x 33 x 4.4 cm, (W x D x H)
  

• • OS-LS-6224: 3.0 kg, 6.61 lbs
  
• • OS-LS-6224P: 4.45 kg, 9.81 lbs
  
• • OS-LS-6248: 4.1 kg, 9.01 lbs
  
• • OS-LS-6248P: 5.5 kg, 12.13 lbs
  

• • Management: one RJ-45 console interface configured as DTE for operation, diagnostics, status, and configuration information. Ship kit includes RJ-45 to DB-9 connector adapter
  
• • AC power connector and BPS connector on rear of chassis
  

• • 0 to 50 degrees C (Standard operating)
  
• • -40 to 70 degree C (Non-operation)
  
• • Humidity: 5% to 95% (Non-condensing)
  
• • Humidity: 5% to 95% (non-condensing)
  
• • Vibration: IEC 68-2-36, IEC 68-2-6
  
• • Shock: IEC 68-2-29
  
• • Drop: IEC 68-2-32
  

• • OS-LS-6224: 33.5W
  
• • OS-LS-6248: 51.5W
  
• • OS-LS-6224P: 33.5W
  
• • OS-LS-6248P: 51.5W